With the development of this turbo system we hope to bring to the avenger/sebring platform a turbo kit made with high quality, reliable parts that won't need to be upgraded a few months down the road when you become more addicted to boost. The fuel and tuning system used is capable of hp levels much higher than what will ever be needed, therefore increasing to higher boost levels will be easily accomplished without needing to upgrade parts. You are limited only by the level of boost your engine can handle. We will not offer a "Stage 1" system. Our base system will be a "Stage 2" intercooled with an approx hp increase of around 150 bhp. We do not believe in building a "cheap" turbo kit. We will not put our name on something that is not safe, reliable, and of the highest quality possible. Items in our system such as the use of braided stainless fuel lines and high quality gauges and tuning controllers are not cheap. However neither is a new car or a new engine, if you have ever seen the results of a rubber fuel line that failed due to high fuel pressures, or an engine that was destroyed due to inadequate tuning, then you would justify to yourself the higher cost of the high quality components.
Keep in mind this will not be a kit, this will be installed and tuned by us, labor charges are included in the pricing. We did not cut any corners in compiling the parts for this project and will not cut any corners during the installation. We will not do this sub-par with low quality parts. Only high quality parts are being used and the price obviously reflects that quality.
Included in our basic installation
• Turbo - Turbonetics T04E-50 Stage III .48 A/R with polished compressor housing
• 2.25" Aluminized TIG welded turbo collector, mandrel bent with stainless steel flex section
• 2.5" Aluminized TIG welded mandrel bent downpipe with stainless steel flex section
• Turbonetics Deltagate Mark II 35mm Wastegate – dump to atmosphere
• Braided Stainless Teflon lined turbo oil feed line
• Braided Stainless 10AN oil drain line and fittings
• High Temperature Exhaust gaskets
• 2.25" Intercooler piping with Silicone couplings and T-bolt clamps
• K&N Air Filter
• Front Mount Intercooler, Bar and plate design, core size 24"x7.5"x3"
• TurboXS type H-RFL Blow off Valve
• NGK V-power spark plugs, 1 heat range cooler
• Disturbing Motorsports custom fuel plumbing system and programmable tuning system, including all new braided stainless fuel supply lines, Walbro 255lph in tank pump, Aeromotive fuel pressure regulator, fuel rails, high flow fuel filter, Synapse Missing Link, DM Fuel Cut Defender, Under hood fuel pressure gauge
• Autometer Ultralite series gauges
• 30 psi boost and vacuum gauge
• 1600 degree EGT gauge
• Transmission temperature gauge
• AEM Wideband UEGO Gauge
• 2 gauge Pillar pod
• 2 gauge instrument cluster gauge bezel
• Flexalite 6 pass Trans cooler
• Flexalite 12" low profile radiator fans
• Battery Relocation to the trunk is required.
Basic System Price $6400 installed (plus 6% sales tax)
Optional Upgrades
• Ceramic Ball Bearing Turbo +$350
• Stainless exhaust collector and downpipe +$350
• 24"x10"x3" intercooler +$10
• 24"x12"x4" intercooler +$70
• Synapse Synchronic Blow Off Valve +$65
• HKS SSQ Blow Off Valve +$110
• Synapse 40mm Wastegate -$50
• Tial Sport 38mm Wastegate -$65
• MSD Ignition Upgrade kit with boost timing control, includes our full kit with coil, mounting plate, distributor cap and rotor +$650
• Accel 8mm Spark Plug Wires +$82.95
• Flexalite 8 pass Transmission Cooler +$45.95
• Bosal 2.5" Catback exhaust system +$450
• High Flow Catalytic Converter +$90
• Battery Relocation to trunk, including box and wiring +$110
• Optional gauge styles and brands are available contact us to determine pricing adjustments
All pricing is subject to adjustment on a vehicle to vehicle basis, based on the mods and components that may already be installed on the car.
If you are interested or have any questions, please e-mail us
sales@disturbingmotorsports.com 
